The Boiler-M8 150-901RF Programmable Wireless Thermostat is a versatile wireless room thermostat designed to provide accurate, convenient temperature control for domestic and light-commercial heating systems.
Featuring a battery-powered programmable room thermostat and separate 230V wireless boiler receiver, the 150-901RF allows the thermostat to be positioned in a suitable living area without the need to run control wiring between the thermostat and boiler.
The system uses reliable 868MHz wireless communication and offers advanced temperature-control options including TPI control, adjustable hysteresis, daily and weekly programming, manual override and up to six programmable temperature periods per day.
Suitable for controlling compatible gas boilers, oil boilers, heat pumps, pumps, actuators and other heating or cooling equipment using a volt-free thermostat connection.
Key Features
Boiler-M8 programmable wireless room thermostat
Model / part number: 150-901RF
Wireless thermostat and separate boiler receiver
Weekly programmable temperature control
Two different scheduling methods
Up to 6 programmable temperature periods per day
Thermostat temperature range: 5°C to 35°C
TPI temperature-control algorithm
Adjustable hysteresis control: ±0.25°C or ±0.5°C
Wireless communication: 868MHz
Wireless range up to approximately 100 metres in open space
Voltage-free COM / NO relay output
Receiver maximum switching load: 16(5)A
Receiver supply: 230V AC 50Hz
Thermostat powered by 2 x AA alkaline batteries
Heating and cooling control modes
Manual temperature override
Comfort and economy temperature modes
Minimum and maximum temperature setpoint limiting
PIN / keypad locking function
Automatic wireless signal renewal
Clear LCD display
Sliding control panel for additional programming functions
The Boiler-M8 150-901RF allows users to automatically control their heating according to the time of day and required room temperature.
Rather than leaving the heating operating at one fixed temperature throughout the day, the thermostat can automatically increase or reduce the target temperature according to the programmed schedule.
This provides greater comfort while helping avoid unnecessary heating when higher room temperatures are not required.
Two Different Scheduling Options
The 150-901RF platform provides two programming methods, allowing the installer or homeowner to select the approach that best suits the property.
Schedule Type 1 - Comfort & Economy
The first scheduling method uses two predefined target temperatures:
Comfort Temperature - typically used while the property is occupied
Economy Temperature - typically used overnight or during periods of reduced heating demand
A 24-hour timeline can then be programmed to automatically switch between these temperatures.
Schedule Type 2 - Up to 6 Temperature Periods Per Day
For more detailed control, Schedule Type 2 allows up to six individual time and temperature periods per day.
For example:
06:00 - 21°C
08:00 - 16°C
11:00 - 19°C
13:00 - 17°C
16:00 - 21°C
22:30 - 16°C
This gives the user considerable flexibility to match heating operation to their daily routine.
Flexible Weekly Programming
Schedules can be configured in several ways:
Separate Monday-Friday and weekend schedules
Individual schedules for each day
One identical schedule for the entire week
This makes the thermostat suitable for households with both regular and varied working patterns.
TPI Temperature Control
The Boiler-M8 150-901RF supports TPI - Time Proportional Integral - control.
TPI control allows the thermostat to manage heating cycles more intelligently as the room approaches its required temperature rather than simply operating as a basic mechanical on/off thermostat.
Different TPI settings can be selected to better suit different heating applications.
Adjustable Hysteresis Control
For systems where conventional on/off temperature control is preferred, the thermostat can also operate using adjustable hysteresis.
Available settings include:
±0.25°C
±0.5°C
This gives installers greater flexibility when matching the thermostat to the behaviour of the heating system.
868MHz Wireless Communication
The thermostat communicates with the boiler receiver using a dedicated 868MHz RF wireless signal.
In open-space conditions the hardware platform is capable of wireless communication at distances of up to approximately 100 metres.
Actual installed range will depend on building construction, wall thickness, metalwork, electrical equipment and other sources of wireless interference.
Volt-Free Boiler Connection
The receiver provides a voltage-free COM / NO relay output, making the thermostat suitable for a wide range of compatible heating appliances that accept a standard volt-free room-thermostat connection.
Applications can include:
Gas boilers
Oil boilers
Combination boilers
System boilers
Heat pumps where compatible with volt-free control
Heating pumps
Zone valves and actuators
Heating control centres
Selected cooling equipment
Always verify the appliance control requirements before installation.
Battery Powered Room Thermostat
The room thermostat is powered by 2 x AA alkaline batteries, allowing it to communicate wirelessly with the receiver without requiring a 230V electrical supply at the thermostat position.
This can make installation particularly convenient when replacing older wired room thermostats or where running additional control cable through the property would be difficult.
230V Wireless Receiver
The separate receiver is powered from a 230V AC 50Hz supply and provides the switching connection to the boiler or heating appliance.
The receiver is rated to a maximum load of 16(5)A and incorporates manual controls allowing the connected heating appliance to be switched independently during commissioning or troubleshooting.
Manual Override
The user can temporarily adjust the required room temperature without completely reprogramming the heating schedule.
This is useful when a temporary increase or reduction in temperature is required outside the normal programmed routine.
Heating & Cooling Control
The 150-901RF hardware supports both heating and cooling operating modes, increasing the range of compatible temperature-control applications.
Temperature Setpoint Limits
Minimum and maximum temperature settings can be restricted within the installer menu.
This can be useful in:
Rental properties
Commercial premises
Offices
Holiday accommodation
Properties where excessive thermostat settings need to be prevented
PIN / Key Lock
The thermostat includes a locking function which can help prevent accidental or unauthorised adjustment of temperature and control settings.
This is particularly useful in rented properties, communal spaces and light-commercial installations.
Clear LCD Display
The thermostat features a clear digital LCD displaying information such as:
Current room temperature
Selected temperature
Current time
Heating demand
Operating mode
Program information
Schedule timeline where applicable
Compact Dimensions
The thermostat measures approximately:
Width: 150mm
Height: 84mm
Depth: 22mm
The wireless receiver measures approximately:
Width: 96mm
Height: 96mm
Depth: 27mm
What's Included?
The Boiler-M8 150-901RF thermostat set includes the core wireless control system:
1 x Boiler-M8 Programmable Wireless Room Thermostat
1 x Boiler-M8 Wireless Boiler Receiver
Depending on final Boiler-M8 packaging, batteries, mounting hardware and connection accessories may also be supplied. Please confirm the contents shown on the retail packaging before advertising individual accessories as included.
Ideal For
Boiler replacements
New heating installations
Replacing older mechanical thermostats
Replacing basic non-programmable thermostats
Gas boiler installations
Oil boiler installations
Heating upgrades
Landlords and rental properties
Domestic properties
Offices and light-commercial premises
Important Compatibility Information
The Boiler-M8 150-901RF uses a voltage-free relay output and is therefore compatible with many heating appliances, but it should not be assumed to be compatible with every boiler or heating system.
Some modern heating appliances use proprietary digital or modulating communication systems rather than conventional on/off thermostat contacts.
Always check the boiler or heating appliance manufacturer's wiring instructions before installation.
Professional Installation Recommended
The room thermostat itself is battery powered, but the wireless receiver requires a 230V electrical supply and connection to the heating appliance.
Installation should therefore be undertaken by a suitably competent heating or electrical professional.
Where installation involves opening or working within a gas boiler enclosure, the work must be carried out by a suitably qualified Gas Safe registered engineer.
Delivery Times
All our deliveries are made by some of the countries most trusted couriers, including Royal Mail, PacelForce, DHL , Fastway Curriers
For most larger sized deliveries, you will receive a call from the courier an hour before the scheduled delivery time.
Free Delivery
Free delivery when you spend £150+ on all our stocked items, up to the maximum 20kg in weight (UK & Ireland Only) To be eligible for this service, you must place your order before 1pm on the previous day.
Delivery Drop Off
It is important to note that we use external shipping couriers. They are responsible for delivering the item(s) to the kerb-side. They are not responsible for delivering items into your home*.
*Please note, for large orders we advise that you seek assistance from friends or neighbours to assist with moving your order, as often the driver will not be able to assist you. Some items may be delivered on a pallet. It is your responsibility to dispose of the pallet, however, we recommend keeping it for the first 14 days in case you need to return your item(s).
Failed Deliveries
In the unlikely event that delivery is attempted when you are not at home, we will contact you by phone and re-book another time that suits you. Please note, there may be a re-delivery charge added at our discretion, which will be reviewed on a case by case basis.
Direct Deliveries from Distribution Centers
To help you receive your items as quickly as possible, parts of your order may be dispatched directly from a distribution center (Ie) Amazon. If this is the case, you will be contacted directly by them to arrange delivery for the products concerned. Please note, these items will arrive at a different time to products dispatched from our head warehouse. Some distribution centers may take between 2-3 days to deliver items.
Non-Stocked Items
Some items are ordered into our warehouse especially for your orders. This means there may be additional lead times on your order arriving. The estimated delivery time for non-stocked items is 5-7 working days.
For orders that contain a mixture of stock and non-stock items, excluding items delivered directly from distribution centers, we will deliver all items together. We will make you aware of this when we phone or email you to confirm the delivery date. You will be given the option to receive them separately as well, however there may be additional shipping charges.
Shipping Rates
All Orders to the UK & Ireland *ONLY*up to 20kg £150+ is Free
Pallet Rates are priced on application and order... delivery lead times will also vary based on post code.
Returns
Returns are subject too a 50% re-stocking charge.
- Items installed/fitted without professional understanding IE Oftec/SafeGas Registered Installer certificates, invalidate any warranty of said item bought.. This is however is at the companies discretion.
- All products must be inspected within 24hrs. Goods are non-returnable after this period.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Goods including but not limited to printed circuit boards, control boxes, chemicals, hazardous materials, flammable liquids or gases. Please ask if you are unsure if you can return your goods.
Some items are not returnable such as PCB Boards and Boilers if they are opened, There also will be a 25% Handling fee for All Items if accepted for return.
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer unless otherwise instructed by Spares Direct.
There are certain situations where only partial refunds are granted (if applicable) Any item not in its original condition, is damaged or missing parts for reasons not due to manufacturer / supplier error Any item that is returned more than 30 days after delivery
Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund, please contact us at info@sparesdirect.ie
Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@sparesdirect.ie and send your item to: Unit 5 Dargan Industrial Park, 62 Dargan Crescent, Belfast BT3 9JP.
Unwanted goods or Failed deliveries of items bought If for any reason you order from us and the item has been shipped, but you no longer wish to have the item, the goods should be returned to us at the consumers cost. The price of goods will be refunded upon delivery/inspection (please note carriage cost will NOT be refunded. This also applies to missed deliveries/collection of goods from currier depot.
Shipping To return your product, you should mail your product to: Unit 5 Dargan Industrial Park, 62 Dargan Crescent, Belfast BT3 9JP.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over £50, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
The Boiler-M8 150-901RF Programmable Wireless Thermostat is a versatile wireless room thermostat designed to provide accurate, convenient temperature control for domestic and light-commercial heating systems.
Featuring a battery-powered programmable room thermostat and separate 230V wireless boiler receiver, the 150-901RF allows the thermostat to be positioned in a suitable living area without the need to run control wiring between the thermostat and boiler.
The system uses reliable 868MHz wireless communication and offers advanced temperature-control options including TPI control, adjustable hysteresis, daily and weekly programming, manual override and up to six programmable temperature periods per day.
Suitable for controlling compatible gas boilers, oil boilers, heat pumps, pumps, actuators and other heating or cooling equipment using a volt-free thermostat connection.
Key Features
Boiler-M8 programmable wireless room thermostat
Model / part number: 150-901RF
Wireless thermostat and separate boiler receiver
Weekly programmable temperature control
Two different scheduling methods
Up to 6 programmable temperature periods per day
Thermostat temperature range: 5°C to 35°C
TPI temperature-control algorithm
Adjustable hysteresis control: ±0.25°C or ±0.5°C
Wireless communication: 868MHz
Wireless range up to approximately 100 metres in open space
Voltage-free COM / NO relay output
Receiver maximum switching load: 16(5)A
Receiver supply: 230V AC 50Hz
Thermostat powered by 2 x AA alkaline batteries
Heating and cooling control modes
Manual temperature override
Comfort and economy temperature modes
Minimum and maximum temperature setpoint limiting
PIN / keypad locking function
Automatic wireless signal renewal
Clear LCD display
Sliding control panel for additional programming functions
The Boiler-M8 150-901RF allows users to automatically control their heating according to the time of day and required room temperature.
Rather than leaving the heating operating at one fixed temperature throughout the day, the thermostat can automatically increase or reduce the target temperature according to the programmed schedule.
This provides greater comfort while helping avoid unnecessary heating when higher room temperatures are not required.
Two Different Scheduling Options
The 150-901RF platform provides two programming methods, allowing the installer or homeowner to select the approach that best suits the property.
Schedule Type 1 - Comfort & Economy
The first scheduling method uses two predefined target temperatures:
Comfort Temperature - typically used while the property is occupied
Economy Temperature - typically used overnight or during periods of reduced heating demand
A 24-hour timeline can then be programmed to automatically switch between these temperatures.
Schedule Type 2 - Up to 6 Temperature Periods Per Day
For more detailed control, Schedule Type 2 allows up to six individual time and temperature periods per day.
For example:
06:00 - 21°C
08:00 - 16°C
11:00 - 19°C
13:00 - 17°C
16:00 - 21°C
22:30 - 16°C
This gives the user considerable flexibility to match heating operation to their daily routine.
Flexible Weekly Programming
Schedules can be configured in several ways:
Separate Monday-Friday and weekend schedules
Individual schedules for each day
One identical schedule for the entire week
This makes the thermostat suitable for households with both regular and varied working patterns.
TPI Temperature Control
The Boiler-M8 150-901RF supports TPI - Time Proportional Integral - control.
TPI control allows the thermostat to manage heating cycles more intelligently as the room approaches its required temperature rather than simply operating as a basic mechanical on/off thermostat.
Different TPI settings can be selected to better suit different heating applications.
Adjustable Hysteresis Control
For systems where conventional on/off temperature control is preferred, the thermostat can also operate using adjustable hysteresis.
Available settings include:
±0.25°C
±0.5°C
This gives installers greater flexibility when matching the thermostat to the behaviour of the heating system.
868MHz Wireless Communication
The thermostat communicates with the boiler receiver using a dedicated 868MHz RF wireless signal.
In open-space conditions the hardware platform is capable of wireless communication at distances of up to approximately 100 metres.
Actual installed range will depend on building construction, wall thickness, metalwork, electrical equipment and other sources of wireless interference.
Volt-Free Boiler Connection
The receiver provides a voltage-free COM / NO relay output, making the thermostat suitable for a wide range of compatible heating appliances that accept a standard volt-free room-thermostat connection.
Applications can include:
Gas boilers
Oil boilers
Combination boilers
System boilers
Heat pumps where compatible with volt-free control
Heating pumps
Zone valves and actuators
Heating control centres
Selected cooling equipment
Always verify the appliance control requirements before installation.
Battery Powered Room Thermostat
The room thermostat is powered by 2 x AA alkaline batteries, allowing it to communicate wirelessly with the receiver without requiring a 230V electrical supply at the thermostat position.
This can make installation particularly convenient when replacing older wired room thermostats or where running additional control cable through the property would be difficult.
230V Wireless Receiver
The separate receiver is powered from a 230V AC 50Hz supply and provides the switching connection to the boiler or heating appliance.
The receiver is rated to a maximum load of 16(5)A and incorporates manual controls allowing the connected heating appliance to be switched independently during commissioning or troubleshooting.
Manual Override
The user can temporarily adjust the required room temperature without completely reprogramming the heating schedule.
This is useful when a temporary increase or reduction in temperature is required outside the normal programmed routine.
Heating & Cooling Control
The 150-901RF hardware supports both heating and cooling operating modes, increasing the range of compatible temperature-control applications.
Temperature Setpoint Limits
Minimum and maximum temperature settings can be restricted within the installer menu.
This can be useful in:
Rental properties
Commercial premises
Offices
Holiday accommodation
Properties where excessive thermostat settings need to be prevented
PIN / Key Lock
The thermostat includes a locking function which can help prevent accidental or unauthorised adjustment of temperature and control settings.
This is particularly useful in rented properties, communal spaces and light-commercial installations.
Clear LCD Display
The thermostat features a clear digital LCD displaying information such as:
Current room temperature
Selected temperature
Current time
Heating demand
Operating mode
Program information
Schedule timeline where applicable
Compact Dimensions
The thermostat measures approximately:
Width: 150mm
Height: 84mm
Depth: 22mm
The wireless receiver measures approximately:
Width: 96mm
Height: 96mm
Depth: 27mm
What's Included?
The Boiler-M8 150-901RF thermostat set includes the core wireless control system:
1 x Boiler-M8 Programmable Wireless Room Thermostat
1 x Boiler-M8 Wireless Boiler Receiver
Depending on final Boiler-M8 packaging, batteries, mounting hardware and connection accessories may also be supplied. Please confirm the contents shown on the retail packaging before advertising individual accessories as included.
Ideal For
Boiler replacements
New heating installations
Replacing older mechanical thermostats
Replacing basic non-programmable thermostats
Gas boiler installations
Oil boiler installations
Heating upgrades
Landlords and rental properties
Domestic properties
Offices and light-commercial premises
Important Compatibility Information
The Boiler-M8 150-901RF uses a voltage-free relay output and is therefore compatible with many heating appliances, but it should not be assumed to be compatible with every boiler or heating system.
Some modern heating appliances use proprietary digital or modulating communication systems rather than conventional on/off thermostat contacts.
Always check the boiler or heating appliance manufacturer's wiring instructions before installation.
Professional Installation Recommended
The room thermostat itself is battery powered, but the wireless receiver requires a 230V electrical supply and connection to the heating appliance.
Installation should therefore be undertaken by a suitably competent heating or electrical professional.
Where installation involves opening or working within a gas boiler enclosure, the work must be carried out by a suitably qualified Gas Safe registered engineer.
Delivery Times
All our deliveries are made by some of the countries most trusted couriers, including Royal Mail, PacelForce, DHL , Fastway Curriers
For most larger sized deliveries, you will receive a call from the courier an hour before the scheduled delivery time.
Free Delivery
Free delivery when you spend £150+ on all our stocked items, up to the maximum 20kg in weight (UK & Ireland Only) To be eligible for this service, you must place your order before 1pm on the previous day.
Delivery Drop Off
It is important to note that we use external shipping couriers. They are responsible for delivering the item(s) to the kerb-side. They are not responsible for delivering items into your home*.
*Please note, for large orders we advise that you seek assistance from friends or neighbours to assist with moving your order, as often the driver will not be able to assist you. Some items may be delivered on a pallet. It is your responsibility to dispose of the pallet, however, we recommend keeping it for the first 14 days in case you need to return your item(s).
Failed Deliveries
In the unlikely event that delivery is attempted when you are not at home, we will contact you by phone and re-book another time that suits you. Please note, there may be a re-delivery charge added at our discretion, which will be reviewed on a case by case basis.
Direct Deliveries from Distribution Centers
To help you receive your items as quickly as possible, parts of your order may be dispatched directly from a distribution center (Ie) Amazon. If this is the case, you will be contacted directly by them to arrange delivery for the products concerned. Please note, these items will arrive at a different time to products dispatched from our head warehouse. Some distribution centers may take between 2-3 days to deliver items.
Non-Stocked Items
Some items are ordered into our warehouse especially for your orders. This means there may be additional lead times on your order arriving. The estimated delivery time for non-stocked items is 5-7 working days.
For orders that contain a mixture of stock and non-stock items, excluding items delivered directly from distribution centers, we will deliver all items together. We will make you aware of this when we phone or email you to confirm the delivery date. You will be given the option to receive them separately as well, however there may be additional shipping charges.
Shipping Rates
All Orders to the UK & Ireland *ONLY*up to 20kg £150+ is Free
Pallet Rates are priced on application and order... delivery lead times will also vary based on post code.
Returns
Returns are subject too a 50% re-stocking charge.
- Items installed/fitted without professional understanding IE Oftec/SafeGas Registered Installer certificates, invalidate any warranty of said item bought.. This is however is at the companies discretion.
- All products must be inspected within 24hrs. Goods are non-returnable after this period.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Goods including but not limited to printed circuit boards, control boxes, chemicals, hazardous materials, flammable liquids or gases. Please ask if you are unsure if you can return your goods.
Some items are not returnable such as PCB Boards and Boilers if they are opened, There also will be a 25% Handling fee for All Items if accepted for return.
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer unless otherwise instructed by Spares Direct.
There are certain situations where only partial refunds are granted (if applicable) Any item not in its original condition, is damaged or missing parts for reasons not due to manufacturer / supplier error Any item that is returned more than 30 days after delivery
Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund, please contact us at info@sparesdirect.ie
Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@sparesdirect.ie and send your item to: Unit 5 Dargan Industrial Park, 62 Dargan Crescent, Belfast BT3 9JP.
Unwanted goods or Failed deliveries of items bought If for any reason you order from us and the item has been shipped, but you no longer wish to have the item, the goods should be returned to us at the consumers cost. The price of goods will be refunded upon delivery/inspection (please note carriage cost will NOT be refunded. This also applies to missed deliveries/collection of goods from currier depot.
Shipping To return your product, you should mail your product to: Unit 5 Dargan Industrial Park, 62 Dargan Crescent, Belfast BT3 9JP.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over £50, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Politique de remboursement
Returns
Returns are subject too a 50% re-stocking charge.
- Items installed/fitted without professional understanding IE Oftec/SafeGas Registered Installer certificates, invalidate any warranty of said item bought.. This is however is at the companies discretion.
- All products must be inspected within 24hrs. Goods are non-returnable after this period.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Goods including but not limited to printed circuit boards, control boxes, chemicals, hazardous materials, flammable liquids or gases. Please ask if you are unsure if you can return your goods.
Some items are not returnable such as PCB Boards and Boilers if they are opened, There also will be a 25% Handling fee for All Items if accepted for return.
To complete your return, we require a receipt or proof of purchase.
Please do not send your purchase back to the manufacturer unless otherwise instructed by Spares Direct.
There are certain situations where only partial refunds are granted (if applicable) Any item not in its original condition, is damaged or missing parts for reasons not due to manufacturer / supplier error Any item that is returned more than 30 days after delivery
Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund, please contact us at info@sparesdirect.ie
Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded.
Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at info@sparesdirect.ie and send your item to: Unit 5 Dargan Industrial Park, 62 Dargan Crescent, Belfast BT3 9JP.
Unwanted goods or Failed deliveries of items bought If for any reason you order from us and the item has been shipped, but you no longer wish to have the item, the goods should be returned to us at the consumers cost. The price of goods will be refunded upon delivery/inspection (please note carriage cost will NOT be refunded. This also applies to missed deliveries/collection of goods from currier depot.
Shipping To return your product, you should mail your product to: Unit 5 Dargan Industrial Park, 62 Dargan Crescent, Belfast BT3 9JP.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over £50, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.